Shader8+ , sunshades designed for all PARD 008 variants (with iris) by CUSTOMHUNTING
Sorry we're out of stock!
Enter your email address below and we’ll notify you as soon as it becomes available.
Shader8+ , sunshade designed just for the PARD 008 and it's variants
The new design Shade8+ fits all old and new PARD 008 + P + LRF + PLRF
but not the 008S/LRF version
(BUILT WITH IRIS)
Many people would say a sunshade is only needed in summer or at least only needed in daylight.......not true! a day and night vision scope benefits from a sunshade that has a built in iris.
The Shader8+ was designed by us from the ground up as we realized that the NV008 digital scope needed a sunshade when aiming towards too much light or at night when the IR light from a Torch can overwhelm the sensitivity of the camera ( causing a white out in some cases ) hence the iris built into the front. The Shader8+ also benefits your PARD by protecting the front lens like a dust cap when not in use !
FACT = We were the first to come up with the PARD 008 sunshade idea and have been advancing it ever since. design improvements may also alter so what you see in photo's may differ slightly.
How it works,
Slide the sunshade on in line with the PARD focus dial ( see photo's ) keep the iris open for normal use, you can leave it on your PARD 008 or take it off when not in use, we have found that keeping it on all the time has its benefits as you may get some glare when least expect it, the sunshade helps block it out when adjusted.
We also noticed that the iris when used in some light settings, would improve the quality of the picture. We would like to thank a few loyal customers who gave us some of the ideas that went into designing this sunshade. Now you can own one and over come whiteouts and sun glare.
At night when the IR light is too much, you can then twist the iris towards the closed setting to get a clearer picture, this will help prevent whiteouts, especially when shining on light walls or a wet environment where reflection can be overwhelming !
This Shader8+ device should not interfere with the normal operation of your PARD 008 unit, we have re-designed it so it is stronger but like the first design it also controls the PARD focus dial, it is made out of one of the best filament known for strength.
We also do a cheaper short clamp version without iris !
It is very rare, but a few PARD 008 units have the focus knob not screwed up tight enough, this does not effect your PARD, however this can cause the shader8+ to be hard to fit on some times. It may need tightening to reduce the overall diameter of the focus tube.
Please feel free to browse our shop and if your not sure of anything then drop us a few Q's, we will be happy to help.
Sorry to say we no longer do the matt texture version, only the gloss.
The only 4 in one PARD sun shade on the market.
- Sun glare protection
- IR glare protection
- instant light setting adjustment
- PARD front end lens protection from dust and scratches
- What's in the box
What's in the box
- Other important info
We try and keep stock to a happy level, sometimes however we may run low or out completely, if we do then we will outsource if we can and send the item within a week, we would let you know if any delays, you will get an email stating "processing" when we are sorting out your order, the next email you will get is "shipped" that is when you will know your item is on its way !
- Warranty if not standard
Every effort and testing of this equipment has been made with no failures. Please do not attach extra gear to unit, we cannot be held accountable for damage to your equipment and cannot be proven for miss use, thus use at own risk. read the instruction and please do not point this product directly at the sun thinking you are protected, it is only designed to reduce glare, you may also damage the camera built inside. ( WARNING = never look directly at the sun )