Adjustable scope mounts weaver/picatinny for 25.4mm & 30mm scope tubes by NON branded

Code Adjscopemount
Click the image to enlarge
Code Adjscopemount
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.

  • Description

    Adjustable scope mounts weaver/picatinny for 25.4mm & 30mm scope tubes

    Have you ever purchased a mount to find out that you don't have enough scope clearance......well now you can buy once without that worry. Fit the mounts without the top section as normal, lay your scope into the mount channels and see how much you need to rase them. loosen the side bolt with the alen key supplied, adjust as needed making sure both mounts are adjusted evenly, then tighten the elevation bolts back up. Clamp down rest of mounts as standard.

    Warning = do not have one mount higher that the other or you may cause damage to your scope tube!

  • Technical


    Color: Black

    Model: Height Adjustable Picatinny/Dovetail Scope Rings

    Net Weight(For 1 unit): 85 g

    Center Height: 32 mm to 38 mm(1.26 in to 1.5 in) / 36mm to 42mm(1.42 in to 1.65 in)

    Tube Fit: 25.4 mm/30 mm(1 in/1.18 in)

    Rail Fit: 21 mm Standard Picatinny Rail 

    Material: 6061 T6 Aircraft Grade Aluminum Alloy

  • What's in the box

    What's in the box 

    2Pcs adjustable height Scope Rings

    2Pcs 25.4mm Rings

    2 Alan keys

  • Other important info

    We try and keep stock to a happy level, sometimes however we may run low or out completely, if we do then we will outsource if we can and send the item within a week, we would let you know if any delays, you will get an email stating "processing" when we are sorting out your order, the next email you will get is "shipped" that is when you will know your item is on its way !

  • Warranty if not standard

    Standard warranty.